Contents
The use of theboilers是公司reasing day by day. The boilers are used to generate steam which further uses in electricity production. Differenttypes of boilersare used in different applications. There are manytypes of boilers, and a Lamont boiler is one of them. In this article, we will mainly discuss different aspects of the Lamont boiler.
What is Lamont Boiler?
TheLamont boileris a type of forced circulationwater-tubeboiler that uses an external feed pump to circulate the water in the small diameter of the water tubes. In this type of boiler, the water is circulated inside the water tubes while the flue gases surround these tubes. In1925,Walter Douglas La-Montinvented theLamont boiler. These were mainly designed for ships.
This was the first forced circulation boiler. Thesetypes of boilershave an external water pump to force the water flow in the water tubes of the boiler. Due to this reason, the water pressure in the natural circulation boiler is lower than the water tube’s pressure.
Lamont boiler is most commonly used in hydropower plants for electricity production. The Lamont boiler generates approximately45 to 50 tons of superheated steam at temperature500°C and pressures of 120 bar.
Working Principle of Lamont Boiler
ALamont boilerworks on theforced circulation principle水在鍋爐的幫助下centrifugal pump. It is an internally fired water tube boiler.
In this boiler, the water is circulated in the flexible water tubes while flue gases flow outside these tubes. The Lamont boiler works in the following way:
- As the Lamont boiler starts working, afeed pumpforces the water into the economizer. This water is heated up to some degree in the economizer.
- Acentrifugal pumpis used to pump the water from the economizer into the water tubes or evaporator tubes.
- When the preheater air goes into the furnace, the furnace heats the air by burning solid fuels. The preheater air gets heat from the fuel and converts into flue gases.
- When flue gases get heat by burning process, they start circulating outside the evaporator tubes, increase the temperature of the evaporator tube’s water and convert the water into steam.
- A mixture of water and saturated steam is generated in the evaporator tubes.
- The resulted mixture transfers to the steam separator drum.
- This drum is an external component of the boiler.
- The separator drum separates the steam from the water and delivers the steam to the superheater.
- A superheater further transfers heat to the steam and increases the steam temperature.
- The superheater transforms the steam into a superheated form.
- The water separated by the steam separator drum is sent back into the economizer, preheat air is sent into the furnace, which further heats the radiant evaporator tube water. After this, the whole cycle repeats until the whole water is converted into steam.
- The Lamont boiler has more than170 barworking pressure. It has the capability to generate50000 kg/hourat a temperature of500°C.
Read More:Working of Lancashire Boiler
History
Martin Benson was the 1stperson who started work on the forced circulation drum boiler concept. Walter Douglas La Mont used his concept and designed the first Lemont forced circulation boiler in 1918. He was an engineer and a Lieutenant Commander in the United States Navy. In 1942, he died New York. This boiler was especially designed to use in ships.
Components of Lamont Boiler
The Lamont boiler has the following major parts:
- Feed Pump
- Grate
- Radiant Evaporator
- Superheater
- Economizer
- Circulating Pump
- Convective Evaporator
- Steam Separating Drum
- Distributing Header
- Combustion Chamber
- Blower
1) Feed Pump
Afeed pumpis the most important part of the Lamont boiler. It uses to pump the water from the external source into the boiler. The main objective of this pump is to supply water to the boiler for steam generation. This pump increases the water pressure so that water can easily transfer into the pump.
Read Also:Different types of Pumps
2)Grate
It is installed on the base of the furnace. The coal is supplied to the grate, and the grate burns it to provide heat to the combustion chamber.
Read Also:Different types of Boilers
3) Economizer
這是一個單位的效率增加boiler. The economizer uses to preheat the water before the water entry into the boiler.
It uses the remaining heat of the flue gases for preheating the water. In this way, the boiler will consume less power and time to transform the water into steam.
4) Circulating Pump
The boiler uses acentrifugal pumpas a circulating pump. The centrifugal pump is known as the heart of the Lamont boiler.
This pump is connected with the steam turbine, and the turbine provides power to the centrifugal pump. As the pump starts working, it delivers water from the steam separating drum to radiant has an impeller and diffuser to pump the water.
Read More:Working of Centrifugal Pump
5) Distributing Header
This unit of the boiler has a discharge valve at one end and a suction valve at another end.
6) Radiant Evaporator
The function of the radiant evaporator is to convert the water into the saturated liquid form; after that, it converts the saturated liquid into steam. This unit receives heat from the burning process of the fuel.
7) Convective Evaporator
This is the place where saturated water transforms into saturated steam.
8) Steam Separating Drum
As the radiant evaporator transforms water into steam, the resulted steam is sent into the steam separating drum.
As the name of the steam separating drum represents, it separates the steam from the water. As the steam is separated, the water is sent back into the radiant evaporator using a centrifugal pump while steam is sent into the superheater.
9) Superheater
As the steam delivers from steam separating drum to superheater, the superheater further provides heat to the steam so that there will be no water particles in the steam. It converts the steam into superheated steam. This superheated steam is used to drive the steam turbine.
10) Blower
The blower receives air from the atmosphere and delivers this air to the air preheater.
12) Combustion Chamber
The combustion chamber uses to burn solid fuels. The produced heat due to the combustion process further increases the temperature of the air and produces flue gases. The flue gases use to heat the boiler water.
Advantages and Disadvantages of Lamont Boilers
The Lamont boiler has the following advantages and disadvantages:
Advantages of Lamont Boiler
- These types of boilers can generate high stem pressure.
- They have no starting problems.
- The Lamont boiler has a flexible design.
- They have a high heat transfer rate.
- They are very easy to start.
- This boiler can generate steam up to 50000 kg/hour
- These have small size drums.
Disadvantages of Lamont Boiler
- The main disadvantage of the Lamont boiler is that the bubbles are formed on the tube’s surface, which decreases the rate of heat transfer to the steam.
Applications of Lamont Boiler
The Lamont boiler is most widely used in different industries for generating steam to produce electricity.
Lamont boiler VS Benson boiler
The main difference between Lamont boiler and Benson boiler is given below:
| Lamont Boiler | Benson Boiler |
|---|---|
| The Lemont boiler has high weight than the Benson boiler. | The Benson Boiler has lightweight. |
| It uses a drum for steam and water separation. | There is no need of the separating drum. |
| In this boiler, there is the formation of bubbles on the surface of the tube, which reduces the heat transfer rate and decreases the boiler efficiency. | There is no formation of bubbles on the tube surface. |
| It takes high time for starting. | It takes a very short time to start. |
| It is less efficient. | It is more efficient. |
FAQ Section
What type of boiler is Lamont boiler?
The Lamont boiler is a watertube boiler.
What are the types of boilers?
The boiler has two major types:
- Fire-tube boiler
- Water-tube boiler
What is called the heart of the Lamont boiler?
The circulating pump (centrifugal pump) is known as the heart of the Lamont boiler.
Who invented the Lamont boiler?
In1925,Walter Douglas La-Montdesigned theLamont boiler